TOUGHCUT Diamond 400, Инструкция по эксплуатации

Страница: 26 / 54

6.2 WORKING STATION
The machine has been designed to be used by one
operator only. Plastic pusher shall be used when cutting
small workpieces and in circumstances where it is
necessary to push the workpiece against the fence.
A - Working with the sliding table (squaring)
B - Parallel cut side
WARNING
6.3.2 WORKING WITH RIP FENCE
- Lock the sliding table. Put the workpiece against the
side surface of rip fence. Push the workpiece forward
across blade.
- For your safety, please use the plastic pusher priority.
Fig.6.3.2
6.3 WORKING WITH THE MACHINE
The choice of the method to use to make a cut
with the circular saw depends on the dimensions of The
wood to be machined and the type of machining to be
carried out. For cutting ennobled wood, use of the
engraver is indispensable to prevent chipping.When the
engraver is not needed,lower it completely underneath
the table.
6.3.1 WORKING WITH THE SLIDING TABLE
- Put workpiece on the sliding table. Fix it with the
aluminium stoper B and gripping arm C.
- Stand on position A, push the operating lever which is
on sliding table forward to across blade.
-26-
A
Fig.6.2
B
A
Fig.6.3.1
B
C