TOUGH-WORKS TDS-G200VLDB, Инструкция по эксплуатации

Страница: 14 / 20

14
MAINTEN
ANCE
MAINTENANCE OF THE BENCH
GRINDER
Turn the power switch “OFF” and unplug the power
cord from its power source prior to any maintenance.
LUBRICATION
The Bench Grinder has sealed lubricated bearings
in the motor housing that do not require any additional
lubrication from the operator.
CLEANING
With the Bench Grinder unplugged, rotate the wheels
slowly and inspect for any damage or trapped
debris. Periodically blow areas in and around the
grinder to keep the machine and work area clean.
WARNING
!
REPLACE the abrasive or wire wheels if there is any
damage at all.
FAILURE to replace a damaged wheel can cause
serious injury to the operator. Periodically check all
nuts and fasteners on the machine to make sure
that they are secure.
DO NOT USE FLAMMABLE MATERIALS to clean
the Bench Grinder. A clean dry rag or brush is all
that is needed to remove dust and debris buildup.
CAUTION
!
CAUTION
!
WARNING
!
Repairs to the Bench Grinder should be performed
by trained personnel only.
Unauthorized repairs or replacement with non-
factory parts could cause serious injury to the operator
and damage to the Grinder.
TDS-G200VLDB