18
Installation
4. Tighten the screws for the wire-strain relief bracket to keep open the cable channel opening.
Once the cable channel is open and the wire-strain relief bracket is loose, you are ready to
connect the jukebox to the lighting console.
5. Locate the Maestro
II
’s MJS computer.
6. Locate the RJ45 cable for the DMX connection.
7. Connect the RJ45 end of the cable to the
DMX
connector on the Maestro
II
’s MJS.
8. Route the free end of the cable into the jukebox through the cable channel and then pass it
through the opening underneath the wire-relief strain bracket.
9. Connect the free end of the cable to the DMX input connector of your lighting console.
From lighting console
Содержание Allegro
Страница 1: ......
Страница 4: ...iv ...
Страница 8: ...8 DMX512 Light Show Introduction ...
Страница 20: ......