Hawk II User Guide Rev3 23-03-12 Copyright © 2012 TouchStar Technologies Ltd
pg. 30
Performing a Reset
Your Hawk II can be reset in two ways; a Soft Reset and a Hard Reset.
Performing a Soft Reset will reset the device but keep all settings and
information stored on the device safe. A Hard Reset will restart the device
but completely wipe any information on the device.
NOTICE:
When you perform a hard reset, you will lose all the data
stored in your device memory and any programs that you have
installed on your device. It will not clear flash file system or stored
calibration info.
Perform a Soft Reset
1.
Remove the expansion door
as advised in the ‗Expansion Door‘
section.
2.
With a suitable tool
briefly
press the reset button until you feel
a resistive click and then release.
3.
Your device will re-boot
automatically
Perform a Hard Reset
Perform a hard reset if:
a)
You want to delete all the
data stored in your device memory
b)
Your device is experiencing
severe operational problems and
have already attempted a
soft reset.
1.
Press and hold the reset button
for a minimum of 10 seconds
and then release.