Hawk II User Guide Rev3 23-03-12 Copyright © 2012 TouchStar Technologies Ltd
pg. 19
Fitting the Hawk II into the Cradle
1)
Present the Hawk II to
the cradle. Seat the 2
rectangular slots in the side
of the Hawk II (Adjacent to
the TouchStar label) onto
the corresponding seating
keys on the Cradle. See
picture for further info.
2)
Push the Hawk II into the cradle until
seated in place under the top catch.
The cradle will then hold the unit until
the handle is closed.
3)
Now close the handle, locking
the Hawk II in place.