TouchIT LED Duo, Руководство пользователя

Страница: 7 / 21

2-1 Power & Signal Connections
2-1-1. Power cord connection:
Connect the power cord to the AC outlet.
2-1-2. Power on:
Switch on the main power of your TouchIT LED Duo (switch is located next to the
AC outlet)
2-1-3. VGA Signal cable connection:
Plug one end of the 15-pin signal cable (VGA) to the video signal connector at the
rear of the PC system (or engine box) and the other end to the TouchIT LED Duo.
Secure the connectors with the screws on the cable connector at both ends.
A HDMI Cable may be used as an alternative
Section 3
POWER AND SIGNAL CONNECTIONS
2-1-1. Power cord connection
2-1-2. Power on
2-1-3. VGA Signal cable connection
2-2 Optional Connections
2-2-1 DVI connection (optional cable)
2-2-2 VGA output connection (Optional male
to male VGA cable)
2-2-3 USB cable connection (for touch
TouchIT LED Duo models)
Installing the TouchIT LED Duo
6