6
ENGLISH
3. Attach the provided cap nut to the wall mount screw.
4. Use the 10mm socket wrench and tighten the screws.
5. Remove the cap nut.
6. Make sure there is a recess of 8-9mm (5/16”-3/8”). If not, use the Phillips screw
driver and tighten or loosen until there is a recess of 8-9mm (5/16”-3/8”).
7. Mount the grab bar onto the screws and secure with flange nut using the
10mm wrench. For easy installation, first put the 2 nuts on the bottom 2
screws for easy installation.
INSTALLATION PROCEDURE
[8~9mm]
5/16"~3/8"
Finished Wall
Wall Mount
Screw
Stud,
Back Support
<Side View>
[8~9mm]
5/16"~3/8"
Finished Wall
Wall Mount
Screw
Stud,
Back Support
<Side View>
