Toto WASHLET SW573, Инструкция по эксплуатации

Страница: 33 / 60

32
Gap between the Main Unit and the Toilet Bowl
(Perform monthly)
You can remove the main unit to clean the top of
the toilet bowl and the bottom of the main unit.
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Unplug the power plug.
2
Remove the main unit.
•
Do not pull the unit with undue force (because the water supply hose and power cord are attached).
Base plate
Bolt
Main unit removal button
Pull the main unit toward you
while pressing the button.
3
Clean the gap.
•
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent, and then wipe with a
soft cloth soaked in water so that no detergent remains.
4
Mount the main unit.
Base plate
Click
Align the center.
Push the main unit until
a click sound is heard.
After mounting, check that the main
unit does not detach even when pulled.
CAUTION
Push the main unit fi rmly on
to the base plate until a click
sound is heard.
(Failure to do so could cause the
main unit to come loose and fall
resulting in injury.)
5
Insert the power plug.
6
Check the POWER LED on the Washlet control panel.
POWER LED Status
Lit Mounting is OK
Off
Press "Power ON/OFF" and check
that it lights up
Flickering Not mounted properly
➝
Mount
again
Maintenance
Gap between the Main Unit and the Toilet Bowl