37
36
Water Filter Drain Valve
Gap between the Main Unit and the Toilet Lid
(Approximately once a month)
The toilet lid can be removed for thorough cleaning.
Soft cloth soaked in
water
Toilet paper, etc.
(May cause damage.)
1
Remove the cover on the left
side of the main unit, and flip
the power switch to "OFF".
(Page 30)
Removing and Reinstalling
Hold with
both hands
Pin
Pin
Use the appropriate
angle.
Vertically
90°
2
Remove the toilet lid.
Strongly pull it out, starting with
and finishing with .
3
Wipe with a soft cloth that has
been soaked in water and
wrung out thoroughly.
4
Reinstall the toilet lid.
Insert and then into the pins.
* Do not use excessive force.
5
Flip the power switch to ON.
(Page 30)
•
The "Power" LED lights up.
6
Reinstall the cover.
(Page 31)
7
Open and close the toilet lid
to check the reinstallation.
Maintenance
Gap between the Main Unit and the Toilet Lid
Water Filter Drain Valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
1
Close the shutoff valve.
(Page 63)
•
The water supply stops.
2
Press "Wand CLEAN"
button.
(Release the pressure from the water
supply pipe.)
3
Remove the cover on the left
side of the main unit, and flip
the power switch to "OFF".
(Page 30)
4
Remove the water filter drain
valve.
•
Loosen the water filter drain valve with a
flat-head screwdriver and then pull it.
Water filter drain valve
Flat-head screwdriver
5
Clean the filter with a tool
such as a toothbrush.
•
Also, remove any dust from inside the hole
of the water filter drain valve.
Filter
6
Reinstall the water filter drain
valve.
•
Insert the water filter drain valve and use a
flat-head screwdriver to tighten it securely.
7
Flip the power switch to ON.
(Page 30)
•
The "Power" LED lights up.
8
Reinstall the cover.
(Page 31)
9
Open the shutoff valve.
(Page 15)
CAUTION
Do not remove the water filter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out)
Maintenance
