10
11
■
For prevention of damage
●
Wipe plastic areas such as
the main unit and remote
control with a soft cloth
tightly wrung out with water.
Dry cloth or tissue
●
Do not lean against the toilet
lid.
■
For prevention of malfunctions and failures
●
Flip the power switch to OFF if there is a risk of lightning.
●
A toilet seat cover or a toilet lid cover cannot be used.
(The seat switch may not function properly.)
Covers
●
Do not urinate on the main unit, toilet seat or wand.
(Doing so may cause a failure or discoloration.)
●
Do not apply strong forces to the control panel of the
remote control.
●
When using a toilet cleaner to clean the toilet, rinse it
off within 3 minutes and leave the toilet seat and toilet
lid open.
(If vapor from a toilet cleaner enters the main unit, it
may cause a malfunction.)
Wipe off any cleaner that remains on the bowl unit.
●
Do not expose to direct sunlight.
(Doing so may cause changes in color, irregular heated
seat temperature, remote control malfunction or the
product malfunction due to the change in temperature.)
●
Use radios, etc. away from the product.
(The product could cause interference with the radio
signal.)
●
If you use a booster seat for infants or a soft highchair,
remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
●
Do not apply force to the remote control.
(May cause malfunction.)
To prevent the remote control from being dropped,
set it in the hanger when you are not using it. Be
careful not to expose it to water.
●
Do not place anything on the toilet seat and lid, and do
not press them with hands.
(Failure to do so may turn on the seat switch, causing
the
fl
oor to get wet if buttons on the remote control are
touched and warm water comes out from the wand.)
Operational Precautions
■
For prevention of malfunctions
●
Do not block the remote control transmitter or receiver.
< About the seat switch >
●
When you sit on the toilet seat, the seat switch turns
ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch (Built-in)
Gap
The toilet seat lowers.
Switch
ON
●
Sit back on the toilet seat.
The seat switch will not turn on unless you sit
on the seat properly.
Note
When a child uses the product, the seat switch
may not be ACTIVATED by their light body
weight.
Since the toilet seat is designed to move up
and down, a clearance is provided between the
toilet seat cushion and the bowl unit.
Safety Precautions
(Continued)
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape wire for the electrical current.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire
to either
fl
at-head terminal.
Check with a quali
fi
ed electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
This product is factory equipped with a speci
fi
c electric cord and plug to permit connection
to a proper electric circuit. Make sure that the product is connected to an outlet having the
same con
fi
guration as the plug.
No adapter should be used with this product. Do not modify the plug provided - if it will not
fi
t
in the outlet, have the proper outlet installed by a quali
fi
ed electrician.
If the product must be reconnected for use on a different type of electric circuit, the
reconnection should be made by quali
fi
ed service personnel.
If it is necessary to use an extension cord, use only a three wire extension cord that has a
three blade grounding plug, and a three-slot receptacle outlet that will accept the plug on the
product.
Replace or repair a damaged cord.
Grounding pin
SAVE THESE INSTRUCTIONS
Introduction
