Toto WASHLET SW4047AT60, Инструкция по эксплуатации

Страница: 17 / 24

32 33
Changing Settings
Auto fl ushing
Set whether or not to clean the bowl
unit automatically
Auto fl ushing
1
Press "Auto
fl ushing"
button.
The setting changes each time the button is pressed once
Set whether or not to clean the bowl unit automatically
For setting to "ON"
Lit
For setting to "OFF"
OFF
Check by the "Auto fl ushing" LED
<Settings complete>
Change the amount of time before
the toilet
fl ushes automatically
Auto fl ush delay
2
Press "Auto
fl ushing"
button.
The setting changes each time the button is pressed once
Change the amount of time before the toilet fl ushes automatically
Two short beeps.
For setting to "After
about 5 seconds".
One long beep.
For setting to "After
about 10 seconds".
One short beep.
For setting to "After
about 15 seconds".
3
Press
"Stopping"
button.
<Settings complete>
Cleaning Features
▶
Set whether or not to clean the wand
automatically
Auto wand CLEAN
2
and
Press "Timer
energy saver"
button and "Setting
con
fi rmation" button
at the same time.
The setting changes each time the button is pressed once
Set whether or not to clean the wand automatically
Long beep Short beep
For setting to "ON" For setting to "OFF"
Set whether or not to spray mist in
the bowl unit automatically
Pre-mist
2
and
Press "Auto
energy saver"
button and "Setting
con
fi rmation" button
at the same time.
The setting changes each time the button is pressed once
Set whether or not to spray mist in the bowl unit automatically
Long beep Short beep
For setting to "spray" For setting to "do not spray"
3
Press
"Stopping"
button.
<Settings complete>
All LEDs
fl ash
Stopping button
Auto fl ushing
button
Timer energy
saver button
Setting
con fi rmation
button
Auto energy
saver button
1
Press "Stopping"
button until all
LEDs on the remote
control start
fl ashing.
(about 10 seconds)
Reference