4
INSTALLATION PROCEDURE - TBW02014U, TBW01025U
INSTALLATION PROCEDURE - TBW02019U
Handshower Bracket
Attach the handshower bracket to the wall in the desired location using the included
hardware and wall anchors (if necessary).
Handshower Bracket
Attach the handshower bracket to the wall in the desired location using the included
hardware and wall anchors (if necessary).
Bracket Base
Pilot Holes
Adjustable Range
9/16”-1”
(15-25mm)
Insert handshower bracket from above
on to bracket base until it clicks.
Bracket Base
Anchor
Screw
Handshower bracket
Rubber plug
13/16”
(20mm)
NOTE
:For hollow wall and/or tile or concrete wall installation, drill 1/4” holes for insertion of
anchors. For installation directly to a wooden stud or stringer, drill 3/32” pilot holes. Anchors
should not be used if attaching to a wall stud. Reinforce when mounting on hollow wall.
NOTE
: For tile or concrete wall installation, drill 1/4” holes for insertion of anchors. For installation
directly to a wooden stud or stringer, drill 3/32” pilot holes. Anchors should not be used if
attaching to a wall stud. Reinforce when mounting on hollow wall.
