background image

1

Required

03B18SS T1

2021.4

Handrail    Resin Coating Type/Stainless Steel Type

Follow the instructions in this installation manual to fully fulfill the functions of this product. After installation, give full explanation on how to use this product to the customer. 

1. Safety Precautions 

(Be sure to observe these instructions.)

Please read these “Safety Precautions” before installation, and install the product correctly.

WARNING

 This instruction manual shows various symbols to 

correctly install the  product in order to prevent harm to 
customers and other users, and damage to property.
Those symbols mean the following contents. 

When this appears next a topic, this 
indicates that ignoring this symbol 
and mishandling the product could 
result in death or serious injury. 

The

      

symbol indicates something that is 

“Prohibited.” The symbol on the left indicates “Do 
not disassemble.” 
The

      

symbol indicates something that “Must be 

implemented.” The symbol on the left indicates 
“Required.” 

 The following symbols are used to classify and explain 

 

 instruction that must be followed. 

WARNING

Prohibit

Do not

disassemble

Required

WARNING

Installation manual

T112 Type/T113 Type

2

-1

. Before Installation

Precautions before installation

 Make sure that  

the wall where the handrail is attached  

is strong enough.

 When installing the handrail in combination with a product with a photoelectric sensor,

      make sure that the sensor does not detect the handrail 

.

For the mounting positions of a product with photoelectric sensor and the handrail, see the manuals or 
catalogs for products with photoelectric sensor.

 Select  

an appropriate mounting method depending on the structure of the building 

.

As the part number of the handrail and those of the wall- (floor-) fixing brackets are different, please place an 
order for the fixing brackets separately depending on the wall structure.
See “      Fixing Brackets (Optional Parts)” for the required number of fixing bracket sets.
*For installation methods not shown in this manual, contact TOTO’s branch office, branch shop, or sales

      office.

 See the catalogue, etc. for the handrail installation position.

 

3. 

Wall 

surface

Top

Bottom

TO

TO

-designate

d

No

backlash!

Do not install the product outdoor or in areas that 

might be submerged.

Doing so could cause a user to fall due to the damage or coming-off 

of the handrail and may result in injury. 

Make sure that the base has sufficient thickness and is reinforced, 

and install the handrail by the specified installation method.

If the base does not have sufficient thickness or is not reinforced, and if you 

do not follow the specified installation method for each base, the handrail may 

come off or the wall may collapse, which could result in user’s fall and injury. 

Make sure that the handrail has no backlash after the 

installation is complete.

If the handrail has backlash, the handrail may come off or the wall 

may collapse, which could result in user’s fall and injury. 

Check the installation orientation of the I type handrail for 

washing area in bathroom.

If the product is installed in the orientation not shown in the illustration, a part of the body 

(neck, etc.) could get caught between the handrail and the wall and may result in injury. 

Check the space between the handrail for Japanese-style toilet and its 

surrounding fixed objects and the installation position of the handrail.

Failure to do so could cause a part of the body (neck, etc.) to get caught 

between the handrail and the fixed object and may result in injury. 

Anyone other than service engineers must not 

disassemble, repair, or modify the product.

Failure to observe this warning could cause a user to fall due to the 

damage or coming-off of the handrail and may result in injury. 

Be sure to install this product on a strong wall or building structure.

If the product is installed directly on a wall that is not strong enough, 

including a soil wall and a gypsum board wall, it may come off or the 

wall may collapse, which could result in user’s fall and injury. 

When the product is used in wet areas such as a bathroom, 

be sure to apply sealant around the mounting holes.

If sealant is not applied, water may enter the back of the wall and 

cause the product to come off or the wall to collapse, which could 

result in user’s fall and injury. 

Be sure to use TOTO-designated fixing brackets.

If TOTO-designated fixing brackets are not used, the handrail may 

come off or the wall may collapse, which could result in user’s fall 

and injury. 

Reinforcement

Содержание T112

















Отзывы: