5
Installation of Hand Shower
Hand shower
Hand
shower
Prepared
holes
1
～
2.5 mm
①
Drill prepared holes.
Make sure they are 1-9/16” (40 mm) apart.
④
Put the hand shower on the hanger.
facing
the wall
③
Insert the shower hanger into the mounting
beads and tighten the hanger screws.
②
Place the mounting plate to the concave
part of the mounting beads, making sure
that tapped holes of the beads are facing
downward.
Then, fix them with longer screws provided.
Mounting plate
Mounting beads
Screws
Shower
hanger
Hanger
Screws
Right below
Tapped
hole
Right below
①
Place the coverplate on the handshower
adapter opening and fasten the face
plate nut.
②
Position the notch below and press the
escutcheon into the face plate
*If the escutcheon is difficult to attach,
apply weak soapy water to the O-ring.
③
Then, tighten the Hand Shower Adapter
Connector to the adapter, making sure that
Flex Hose Outlet faces below in the end.
Installation of Hand Shower Hanger
escutcheon
coverplate
Face plate nut
gasket
Notch
Hand Shower
Adapter
Connector
escutcheon
Hand Shower
Adapter
connector
Flex Hose
Outlet
1/32
～
3/32 in
handshower
adapter
④
Connect the hand shower to the Flex Hose
outlet. MAKE SURE THAT THERE IS A
GASKET.
Caution
Be sure to confirm that the gap between
the connector and escutcheon is
between 1/32 ~ 3/32 in (1 ~ 2.5 mm)
If the Flex Hose Outlet is not faced below, take
out the connector and try again.
1-9/16”
(40 mm)
ENGLISH
