Toto NEOREST SE, Инструкция по эксплуатации

Страница: 16 / 126

28
GB
The Energy Saver timer and the Smart Energy Saver can be used together
The Smart Energy Saver functions when the Energy Saver timer is not operating to increase energy conservation.
For example, they can be used together in the following manner to conserve energy.
How to use them together Ź See page 31.
Main display section
The seat temperature is
lowered.
(Orange)
Main display section Main display section
The seat heater turns off. Operates at the set
temperatures.
(Green)
(Blue)
Using the Energy Saver timer
Conserving energy using the Energy Saver timer
Example:
Follow these steps to set Energy Saver to turn off the heaters from 1 a.m. to 7 a.m. (six hours)
1
1
At the time that you want the Energy
Saver timer to start every day (1 a.m.),
press on the remote
control.
The Energy Saver starts.
"3" appears on the remote control display. Ɣ
Back of the remote control
Check
"3" indication
•
TIMER button
The seat heater can still be used when the Energy Saver timer is active.
Even when the Energy Saver timer is active, sitting on the seat will turn the seat heater on
temporarily.
It takes about 15 minutes for the seat to warm up.
It takes about 10 minutes for the water to become warm. Ɣ
Ɣ
Ɣ
Time Time
Energy Saver
timer in use
Energy Saver
timer in use
Smart Energy
Saver on Smart Energy
Saver on
Heater on Heater on
Heater on Heater on
29
Operation
GB
2
2
Press to set it to 6
hours.
The setting is complete.
Back of the remote control
Check
"6" indication
•
TIMER button
When the Energy Saver timer is working, the
"ENERGY SAVER" indicator in the main display
section lights green.
Changing the Energy Saver duration
This can be set to 3, 6 or 9.
1
1
Press on the remote
control.
Each press of the button cycles through the settings 3,
6, 9 and off (nothing appears on the display when off).
Select the setting for the duration you want.
The setting change is complete.
When you want to change the duration setting (3, 6
or 9 hours), reset the Energy Saver at the starting
time you desire.
Ɣ
¿
Back of the remote control
Check
•
TIMER button
When you want to change the Energy Saver starting time, after turning the Energy Saver timer off
once, press again at the time you want it to start.
Ɣ
Ɣ
Ɣ
Check here
Main display section
Lights (Green)
•
Check here
Main display section
Lights (Green)
•
off (Nothing shown) off (Nothing shown)