Toto Neorest II Series, Руководство пользователя

Страница: 4 / 24

4
ENGLISH
SERVICING PROCEDURES
Replacing the LED
1) Turn the wall and power adapter
switches to the off position. Dis-
connect the LED connector from
the power adapter connector.
Down
Up
2) Loosen the three screws on the
lighting cover and slide the cover as
shown.
3) Replace the LED with a new one.
Attach the new LED along the cable
guides on the cover as shown.
NOTE: When attaching the LED, make
sure the upper and lower sides of
the LED are positioned correctly.
4) After the LED is attached, replace the cover using the same procedure as
in Step 2. Secure the screws and check that it is assembled securely.
5) Turn on the wall and power
adapter switches to confirm that
the LED is lighting correctly.
DISCONNECT
Lighting Cover
Fixed Base
Connector
With 5 cable
guides
Lighting (LED)
Cover
LED
LED unit
LED light source