20
Motion-
detection
sensor
When finished, stand up from
the toilet seat.
After approximately 5 seconds, the toilet
flushes.
●
●
When the sensor no longer detects a person, the "Sensor"
light on the Main Unit Display will go off.
When finished, move at
least 1 foot (30cm) away
from the toilet.
●
The toilet will not flush automatically unless the
person stands for at least 6 seconds in front of
the Neorest.
When standing in front of the toilet
Motion-
detection
sensor
Lights up
When sitting on the toilet seat
After approximately 3 seconds, the toilet
will do a "light flush."
●
The toilet will not flush automatically unless
the person is seated for at least 6 seconds.
1
●
●
Even when seated on the toilet, the sitting position or posture could cause the sensor to mis-detect and start an automatic
flush.
2
1
●
●
Initially, auto flush is set to "on."
●
●
After flushing automatically, the toilet will not flush automatically for approximately 60 seconds. Please use
the Remote Controller buttons to flush the toilet.
2
●
●
If small children will be using the device, the sensor may not detect them because of where they stand in
front of the toilet and their height. In such cases, please use the buttons on the Remote Controller to Flush
and open and close the seat and lid.
●
●
After flushing automatically, the toilet will not flush automatically for approximately 60 seconds. Please use
the Remote Controller buttons to flush the toilet.
