Toto G400 SN920M, Инструкция по эксплуатации

Страница: 16 / 64

Personal Setting
Stopping
Cleansing
Drying
[STOP]
Stops the operation.
[REAR]
Cleanses your rear.
*The mode changes between [SOFT] (Flickering) and
[REAR] (Lit) each time the button is pressed.
[SOFT]
Washes your rear with mild water pressure.
[DRYER]
Dries your rear.
[FRONT]
Serves as a bidet for ladies.
[USER1] / [USER2]
You can store your preferred wand position, water pressure and water temperature a setting.
●
To store a setting
While cleansing is in progress, set your preferred wand position, water pressure, and warm water
temperature, and then press and hold [USER 1] or [USER 2] for 2 seconds or longer.
●
To use
Press [USER 1] or [USER 2], and then press the button for the cleansing you want to use.
*The wand position and water pressure lamps will light up for about 10 seconds in their set
positions, and the water temperature display switches.
Press a button on the remote control; a beep sounds when the top unit receives the signal.
Opening and closing
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
[FULL FLUSH]
Performs a full flush.
Up to 10 m (33 ft) of toilet paper (single)
[LIGHT FLUSH]
Performs a light flush.
Up to 3 m (10 ft) of toilet paper (single)
Flushing
16
Basic Operations