Toto DSE101E, Руководство пользователя, Страница: 8 / 16

6
2.Install four (4) D size alkaline batteries.
3.Relace battery case cover.
4.Tighten screws.
更换电池 [ DC 型] REPLACING THE BATTERY [DC Type]
Battery
case cover
Screws
Batteries
＋
－
－
＋
Battery case
保养和清洁
CARE AND CLEANING
Wipe away any debris adhering to the
spout or sensor.
Wipe away debris with a damp cloth containing a
suitable amount of a neutral, dishwashing detergent.
Then wipe clean with a damp cloth.
Sensor window
● For Light Cleaning
● For Heavy-Duty Cleaning
When cleaning around the sensor, please be careful
not to scratch the surface of the sensor window.
Do not use detergent that might
hurt the surface of spout.
Detergents containing acid, chlorine bleach or alkali.
Detergents that are coarse granules in
nature, such as polishing powder.
Solvents such as paint thinner or benzene.
NOTE: Make sure the batteries
are installed in correct
orientation (polarity).
2.装入4节碱性干电池（1号电池 1.5V）。
3.盖上电池盒盖。
4.拧紧螺丝。
注意：请确认电池的极性。
干电池
电池盒
电池盒盖
螺丝
感应窗
●
轻微脏污清洗时
请将浸透冷水或温水的软布拧干，擦去吐皂口
和感应窗上的污迹。
●
较重脏污清洗时
请用浸有适量的、已稀释的中性洗涤剂的软布
擦去污迹，然后再用清水擦拭。
●
在擦拭感应窗周围时，请小心不要伤及感应窗表面。
● 请不要使用可能损伤吐皂口的洗涤剂。
例如：
These include:
●
酸性洗涤剂、氯系漂白剂、碱性洗涤剂
● 含有磨砂颗粒的洗涤剂，如抛光粉
● 稀释剂如油漆或含苯稀释剂
1.Remove cover of battery case.
1.打开电池盒盖。
Abrasive aids such as nylon scrubbers/brushes,
steel wool, etc.
● 研磨器具，如尼龙刷子、钢丝球等
● The standard life cycle time is 2 years,
based on average use 2000 times/month.
● 干电池的标准寿命为2000回/月，约使用2年。