Toto DSE101E, Руководство пользователя, Страница: 10 / 16

8
故障分析 TROUBLESHOOTING
Problem Operating Solution
Green LED flashing Fill tank with liquid soap.
Red LED flashing Battery is low Replace batteries.
Green LED solid on Clean the pump unit.
Soap won’t
stop running
-
-
Sensor window is dirty Clean sensor window.
-
There is an obstruction in front of sensor window Remove the obstruction.
Soap comes out
unexpectedly
Sensor window is dirty Clean sensor window.
Soap will be automatic dispersed after 48 hours of non-usage to prevent
clogging.
Amount of dispensed
soap is small
Pump is not working correctly Clean the pump unit.
Cause
Soap is low
Pump is sticking
-
Clean sensor window.
-
Sensor cable is disconnected Connect cable.
-
Remove the obstruction.
Sensor window is dirty
There is an obstruction in front of sensor window
-
Connect cable.
-
Tube is disconnected Connect tube.
-
Plug in the AC adapter.
Power supply (AC adapter or battery box) is
disconnected
AC adapter is not plugged in.
-
-
-
现象 请您检查 处理方法 原因
No soap comes out
绿色灯闪烁 补充皂液。 缺少皂液。
红色灯闪烁 电池电量低。 更换电池。
绿色灯亮 清洗泵。 泵被粘住了。
不吐皂液
清洗感应窗。 感应窗较脏。
感应器连接线断开。 连接感应器连接线。
移开障碍物。 感应窗前有障碍物。
连接电源线。
电源线 (AC适配器或电池盒) 断开了.
皂液软管断开了。 连接皂液软管。
插入AC适配器. AC适配器没有插入。
感应窗较脏。 清洗感应窗。
移开障碍物。 感应窗前有障碍物。
High soap concentration.
Diluted soap.
清洗泵。
皂液粘度高。
感应窗较脏。 清洗感应窗。
在不使用的情况下，48小时后，产品会自动吐皂以防止堵塞。
皂液意外吐出
皂液吐出量少
泵故障了。 清洗泵。
吐皂不止
The following conditions are not faults. Before asking for repair, please check the following items. If the product still
cannot operate normally, please consult your installer, seller or sales office. For details, please see after-sales service.
下列情况并不是故障。委托进行修理之前，请检查以下项目。如果依然不能恢复正常，敬请垂询为您安装的安装公司、
销售商或者营业所，详情，请见售后服务 (见封底）。
稀释皂液。
Clean the pump unit.