19
QoS:
this option allows you to limit the download and upload data rate for every PCs
connected with the router. So the bandwidth can be used reasonably.
5.2.4 Wireless Multibridge
When the wireless signal is too weak as the long distance, you can enable this function to
extend the WiFi coverage.
Wireless Bridge:
In this mode, the router is used as an AP to get other router’s signal.
Wireless WAN:
The same function as
Wireless Bridge
, but the only setting difference is
that Wireless WAN need not to stop the DHCP Server.
SSID:
Click
Search AP
; choose the SSID of your Primary Router and then enter the
encryption key of the upper AP if the encryption is enabled.
5.2.5 MAC Authentication
You can control the PC to connect the wireless Router through MAC authentication. At first,
you should select the SSID of your wireless network. Then you can setup to allow all or just
allow the specific PCs to connect to your wireless network.
Note:
Both these two repeater methods can help you to expand the wireless coverage and allow
more terminals to access Internet. But since Wireless WAN
need not stop DHCP Server, a
ll PCs’ IP
Addresses are assigned by the Secondary Router itself. So this method allows more PCs to access
Internet than W
ireless Bridge. In Wireless Bridge mode, the PCs’ permissions to access Internet are
decided by Primary Router which can make users to manage the LAN more easily.
Содержание n300rb
Страница 1: ...User Manual TOTOLINK Wireless N Router...
