TM-586 VA User’s Manual
8
G. Other Jumper Settings
POWER SW (FOR ATX POWER SUPPLY):
The button should be a momentary switch that is normally open.
Pushing the ATX Power Switch will immediately change the system
status. Before or during “POST”, you need to hold the button for four
seconds in order to turn off the system.
JP5: Clear CMOS
Turn off the system and short pins 2-3 (J3) to clear CMOS. Then short
pins 1-2 before turning it on. You may damage the chipset if you power
on the system by shorting pins 2-3.
JP5
1-2
Normal operation(Default).
2-3
for clearing CMOS Data.
CPU Cooler Fan connector
This is the connector for CPU cooler. Never use the jumper to short the
connector. Serious damages caused this way will not be warrantied.
Power LED & Keylock:
Keyboard lock switch and
Power LED connector.
Speaker:
Connect to the system’s
speaker for beeping.
Reset:
Short to restart system.
HDD LED:
LED ON when on board PCI
IDE hard disk activates.
SMI SW:
Short to enter sleep mode. A
keystroke or mouse movement
(mouse driver exits) will instantly
“wake up” the system.
