TM-586 VA User’s Manual
6
E. DRAM, EDO RAM Installation Procedures:
Change nothing if EDO RAM is used. BIOS
automatically detects the
RAM type.
With 586 CPUs, two FPM/EDO RAM Modules are required on SIMM
sockets to compose a bank for the system to start.
In VIA VPX chipset, SIMM and DIMM RAM are able to co-work.
MEMO for Installing Syatem:
⊕
Concerning memory setup, you can find how to from “Chipset
Frature Setup” under BIOS setup. However, to avoid system unstable
or system hang, user without engineering background is not suggested
to change BIOS set up.
⊕
If system boot failure, please clean SIMM socket
(with clean oil)
or
polish
Gold-Finger
of DRAM with
soft eraser
, and try again.
SIMM Socket output voltage is
5V, expandable to 512MB.
Support 5V Fast Page Mode/
Extended Data Out RAM.
The BIOS DRAM default setting
is 70 ns. Change the BIOS
“Chipset Feature Setup” default
setting to 60ns for better
performance, if the chipset is
marked 60ns.
