16
17
SETTING THE WATTAGE
The Intu Pro Mini has adjustable wattage that
can be set from 1 - 25W. Use the adjustment
buttons on the battery to increase or
decrease the wattage.
Tip
: Press and hold down either of the
adjustment buttons to make speedy changes
to the wattage.
VAPING
The Intu Pro Mini can use either an automatic
“breath activated” switch or the power button.
Either draw on the mouthpiece to produce
vapour automatically, or press the power
button and then draw from the mouthpiece.
E-LIQUID LEVEL
To prevent the atomizer head from becoming
dry and burning prematurely, ensure the
e-liquid level does not drop below the cotton
inlets on the atomizer head, visible through
the glass section of the tank.
CHARGING THE BATTERY
To charge the battery, connect the charge
port on the battery to a USB port or suitable
wall adaptor with the supplied charging cable.
The screen will display an animated battery
icon while charging.
REPLACING THE ATOMIZER HEAD
Remove the tank from the Intu Pro Mini
battery by unscrewing at the tank base. Invert
the tank and unscrew the base. Unscrew the
atomizer head from the tank base, and screw
in a new atomizer head. Before fitting a new
atomizer head, remember that it will need
priming as described in the section
“Priming
the Atomizer Head”.
Reminder:
After priming a new atomizer head
it is recommended to wait 5 minutes before
vaping to ensure the atomizer head is fully
saturated.
USING YOUR INTU PRO MINI
TW_INTU-PRO-MINI_manual.indd 16-17
TW_INTU-PRO-MINI_manual.indd 16-17
21/09/2021 11:56
21/09/2021 11:56
