18
19
KEY LOCK MODE
Key lock mode prevents accidental changes
to the wattage. To turn key lock mode on,
press and hold the wattage adjustment
buttons simultaneously, the screen will display
“Lock”. Whilst key lock mode is enabled, the
screen will continue to display “Lock” if the
adjustment buttons are pressed. Adjustments
to wattage cannot be made until key lock
has been disabled. Hold both buttons down
again to disable key lock mode. The screen will
display “Unlock”.
ADVANCED FEATURES
The Intu Pro Mini has some advanced features
that can be accessed in the main interface
by pressing the power button 3 times. Move
from feature to feature using the wattage
adjustment buttons, and select by pressing
the power button. The Intu Pro Mini will
automatically close the settings interface
after a couple of seconds if no buttons are
pressed.
POWER MODE
In power mode, the wattage can be adjusted
by pressing the up and down adjustment
buttons. This is the standard mode the Intu
Pro Mini will be set to.
VOLTAGE MODE
In voltage mode, you can adjust voltage
instead of power, within a limited range
by pressing the up and down adjustment
buttons. To access voltage mode, press
the power button three times and use the
wattage adjustment buttons to navigate the
options until the screen says “Mode – Volt”
press the power button to confirm the choice.
SECONDARY DISPLAY MODE
A selection of 3 display modes is available. To
access them press the power button 3 times,
and use the wattage adjustment button to
navigate to “SYS VPW SET”. Press the power
button to choose from a secondary display
below the main wattage/voltage position of:
voltage/wattage (whichever is not the main
display), puff counter, or “wave” (an attractive
moving graphic on the screen).
USING YOUR INTU PRO MINI
TW_INTU-PRO-MINI_manual.indd 18-19
TW_INTU-PRO-MINI_manual.indd 18-19
21/09/2021 11:56
21/09/2021 11:56
