14
15
PRIMING THE ATOMIZER HEAD
It is important to “prime” a new atomizer head
before first use. Failure to do so can damage
the atomizer head.
Remove the tank from the Intu Pro Mini
battery by unscrewing at the tank base. Turn
the tank upside down, then unscrew the
tank base from the glass section of the tank.
Remove the atomizer head by unscrewing and
drip a few drops of e-liquid onto the cotton
wick through the openings on the sides of the
atomizer head. Screw the atomizer head back
into the tank base. Screw the base back into
the tank and refit to the battery.
ATOMIZER HEAD LIFESPAN
Atomizer heads do not last forever and
need to be replaced periodically. Lifespan is
generally from a few days to several weeks,
depending on power used, vaping style,
flavour and type of e-liquid. A slight burnt
taste, general loss of vapour production,
or a reduction in flavour intensity can all be
indications that the atomizer head requires
replacement.
FILLING THE TANK
Press the filler release button on the side of
the tank and slide the top cap in the direction
indicated by the arrow symbol. Once opened,
fill the tank, then press the filler release button
again, and slide the top cap back over the tank
to secure.
Note:
To avoid leaking, ensure an air gap of
2mm remains above the e-liquid after filling.
After priming a new atomizer head and filling
the tank, it is recommended to wait 5 minutes
to ensure the atomizer head is fully saturated.
ADJUSTING THE AIRFLOW
To adjust the airflow to your personal
preference, rotate the airflow control ring
located at the bottom of the tank. The more
area exposed behind the slots in the airflow
ring, the more open the air draw will be.
POWERING ON AND OFF
Press the power button 5 times in quick
succession to turn the Intu Pro Mini on. To turn
the device off again, press the power button 5
times quickly.
USING YOUR INTU PRO MINI
TW_INTU-PRO-MINI_manual.indd 14-15
TW_INTU-PRO-MINI_manual.indd 14-15
21/09/2021 11:56
21/09/2021 11:56
