TOTALINE P374-1 900, Руководство пользователя

Страница: 77 / 106

TOTALINE
Page 16.3
Controlling or Reading the
Remote Temperature (RS
1
)
Controlling or Reading the
Remote Temperature (RS )
1
The thermostat may be programmed to only READ the remote sensor,
or to CONTROL to the remote sensor. Advanced Setup step #37,
below.
Read Only Sensor (RS1): If step #37 is set to only READ to the
remote sensor, this temperature may be viewed by pressing the
OUTSIDE button on the thermostat and then pressing the MODE
button.
Control Sensor (RS1): If step #37 is set to CONTROL to the remote
sensor, the thermostat will ignore the reading of its internal
temperature sensor and only display the temperature reading from
the remote sensor. The degree icon on the thermostat will blink
once per second to indicate that a remote sensor reading is being
displayed. This is the factory default setting.
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
PROGRAM
Press
Optional Remote Sensor:
YES = Read Only Remote
Sensor RS1.
NO = Control to Remote
Sensor RS1.
YES
NO
PROGRAM
MODE
MODE
Setup
37
Outside
Press the MODE button. While holding
the MODE, press the PROGRAM
button to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.
TOTALINE
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the
MODE
button to move back-
wards through the
setup screens.
16