Total TSTLI20018, Руководство пользователя

Страница: 14 / 17

14
who observes the distance between the operators. If someone or an animal
enters the work area, immediately stop the operation.
• If the cutting tool accidentally hits a rock or hard object during operation, stop the
tool and inspect for damage. If the cutting attachment is damaged, replace it
immediately. Using a damaged cutting tool can cause serious personal injury.
•
Correct positioning and handling allow optimal control and reduce the risk of
injury.
When using a nylon head (bump and go type)
•
The nylon head is a double line trimmer head fitted with a bump and feed
mechanism.
•
To remove the nylon line, tap the trimmer head against the ground while turning.
Most effective cutting area
•
The bump feed will not work properly if the nylon cutting head is not rotating.
•
If the nylon cord does not come off while hitting the head, rewind/replace the
nylon cord following the procedures in the maintenance section.
Maintenance and cleaning
Always make sure the tool is turned off and the battery cartridge has been removed
before attempting to perform any inspection or maintenance on the tool. Failure to turn
off and remove the battery cartridge could result in serious personal injury from
accidental starting.
Never use gasoline, thinner, alcohol or the like to clean the tool. May result in
discoloration, warping, or cracking.