Total TSGLI2001, Быстрый старт

Страница: 7 / 12

7
Execution time required as follows:
Viscosity table
Lining Material Viscosity DIN-s
Solvent-based paints 15-50
primers 25-50
pickling undiluted
2 component paints 20-50
varnishes 15-40
water paints 20-40
car finishes 20-40
Wood Protection Center undiluted
Spray work with elevated objects
•
Fill the container with the coating material. Tighten the thread of the gun.
•
Connect the gun to the power supply, make sure the voltage corresponds to the
nameplate.
•
Turn on the unit. Adjust spray pattern, material adjustment amount, airflow and
pressure.
•
Press the trigger of the spray gun.
Note: With the unit turned on the air cap flows in the air.
Spray Gun Adjustment
Selection of spray patterns
A = Spray vertically
For horizontal surfaces.
B = Spray horizontally
For vertical surfaces
C = Circular shape spray
For corners, edges and others
Setting the desired spray pattern
•
The shape of the spray pattern is adjusted by turning the nozzle nut to the vertical,
horizontal or diagonal position.
•
To adjust the spray pattern, unscrew the union nut counterclockwise to remove it
from the paint gun.
•
Pull and rotate the spray head to the requested position.
•
Screw the union nut back onto the paint gun.
• Try each pattern and use the pattern that is right for your application.
Note: During adjustment of the spray head, never pull the trigger.