Total TS730301, Руководство пользователя

Страница: 6 / 18

power cord or plug, do not connect the equipment-grounding conductor to a live
terminal.
• Consult an electrician or service person if you do not fully understand the
grounding instructions, or if you are not sure if the tool is properly grounded.
Caution
Always check that the outlet in question is properly grounded. If you are not sure, have
a licensed electrician check the outlet.
Make sure your extension cord is in good condition. Protect your extension cords from
sharp objects, excessive heat, and damp or wet areas.
When using an extension cord, be sure to use one that is strong enough to carry the
current your product will draw. An undersized cord will cause a drop in line voltage,
resulting in loss of power and overheating.
The following table shows the correct size to use based on cord length and nameplate
amp rating. If in doubt, use the next heavier gauge. The lower the gauge number, the
heavier the cable.
Caveat
•
For your own safety, please read the manual before using the tool.
• Wear eye protection.
•
Do not wear gloves, a tie, or loose clothing.
• Make sure the saw is on a firm, level surface and is properly secured.
•
Use only recommended accessories.
• Be very careful with very large, very small, or awkward workpieces.
•
Keep your hands away from the blade at all times to avoid accidental injury.
And remember
: wear safety glasses, hearing protector and respiratory mask. Wear safety
gloves when handling blades and rough materials.
Technical data
Data sheet
Motor 220-240V ~ 50Hz - 350W
blade speed 11.6m/s
blade length
1511mm
Cable length in meters
M
ax
im
um
c
ur
rent
in t
he c
abl
e
(A
)