FUEL & OIL MIXTURE
z
Never fill the fuel tank to the very top.
z
Never add fuel to the tank in a closed non-ventilated
area.
z
Do not add fuel to this unit close to an open fire or
sparks.
z
Be sure to wipe off spilled fuel before attempting to
start engine.
z
Do not attempt to refuel a hot engine.
Fuel used for this model is a mixture of unleaded gasoline and
approved engine lubricant. When mixing gasoline with two-cycle
engine oil, use only gasoline which contains NO ETHANOL or
METHANOL(Types of Alcohol) Use Branded 89 octane or higher
Unleaded gasoline known to be of good quality. This will help to avoid
possible damage to engine fuel lines and other engine parts.
MIXTURE RATIO IS 40:1
GASOLINE-40PART OIL-1
PART
Fuel mixture at the rate other than
40:1may cause damage to the
engine, Ensure mixture ratio is
correct.
PREPARING FOR OPERATIONS
WHEN MIXING GASOLINE WITH TWO CYCLE ENGINE OIL, USE ONLY
GASOLINE WHICH CONTAINS NO ETHANOL OR METHANOL (TYPES OF
ALCOHOL). THIS WILL HELP TO AVOID POSSIBLE DAMAGE TO
ENGINE FUEL LINES AND OTHER ENGINE PARTS.DO NOT MIX
GASOLINE AND OIL DIRECTLY IN THE ENGINE FUEL TANK.
IMPORTANT: Failure to follow proper fuel mix instructions may cause
damage to the engine.
1. When preparing fuel mixture, mix only the amount needed for the
job you are to do. Do not use fuel that has been stored longer than
