Before operation
SAFETY MANUAL included with unit. Read before operating and keep
for future reference to learn proper, safe operating techniques.
NYLON CUTTER HEAD Contains replaceable nylon trimming line that
advances when the trimmer head is tapped against the ground while
the head is turning at normal operating speed.
CUT-OFF KNIFE Trims nylon filament to the correct length-7 , head to
end of line-when nylon trimming head is bumped on the ground
during operation, line advance. If trimmer is operated without a
cut-off knife the line becomes too long (more than7”) the engine, this
will overheat or damage the engine.
DEBRIS SHIELD Mounted just above the cutting attachment. Helps
protest operator by deflecting debris produced during debris produced
during the trimming operation. Do not operate unit without shield.
D-HANDLE this handle can be adjusted at you convenience for
comfort.
DRIVE SHAFT ASSEMBLY contains a specially designed liner flexible
drive shaft.
IGNITION SWITCH “slide switch” mounted on top of the Throttle
Trigger Housing. Move switch FORWARD to Run, BACK TO STOP.
SAFETY LEVER Before acceleration compresses it please.
THROTTLE TRIGGER Spring loaded to return to idle when released.
When accelerating, press trigger gradually for best operating
technique. Do not hold trigger while starting.
PURGE BULB Pushing purge bulb (7 to 10 times before starting),will
remove all air and sale fuel from fuel system and bring fresh fuel to
the carburetor.
FUEL TANK LID.
FUEL TANK Contains fuel and fuel filter.
AIR CLEANER COVER Contains replaceable felt element.
