Total TIRLI2002, Руководство пользователя

Страница: 8 / 17

8
Attention
Always install the battery cartridge completely until the red indicator cannot be seen.
Otherwise, it may accidentally fall off the tool and injure you or someone around you.
Do not install the battery cartridge forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Remaining battery capacity indication
1. Indicator lights two.check button
Press the check button on the battery cartridge to indicate the remaining battery capacity.
The indicator lights come on for a few seconds.
Indicators
remaining capacity
Switched on
Off
>80%
30% to 80%
<30%
Note: Depending on the conditions of use and the ambient temperature, the indication may differ
slightly from the actual capacity.
Battery and tool protection system
The tool is equipped with a tool and battery protection system.
This system automatically cuts power to the motor to extend tool and battery life. The
tool will automatically stop during operation if the tool or battery is in any of the following
conditions.
overload protection
If battery operation causes abnormally high current consumption, the tool automatically
stops without any indication. In this situation, turn off the tool and stop the application
that caused the tool to overload. Then turn on the tool to get it running again.
Overheat protection
When the tool/battery overheats, the tool automatically stops. In this situation, allow the
tool/battery to cool down before turning the tool back on.