Total TG1252306, Инструкция по эксплуатации

Страница: 6 / 15

6
•
Do not restart the cutting operation on the workpiece. Allow the blade to reach
full speed and re-cut with caution. The blade can bind, rise, or roll back if the
power tool is reset on the workpiece.
•
Any oversized workpiece should be clamped with the proper clamps to minimize
the risk of jamming. Brackets, clamps, “C” presses, clamps or “F” presses must
be positioned on the edges of the workpiece at a safe and secure distance from
the cutting or roughing line to be performed.
•
Be very careful when making a "pocket cut" in existing walls or other blind areas
- you can cut gas or water pipes, electrical wiring, or objects that can cause
kickback.
Sanding operations
• Do not use oversized discs. Follow the manufacturer's recommendations when
selecting sanding paper. Sandpaper that extends beyond the sanding pad
presents a hazard and can cause binding and kickback.
Polishing operations
• Do not allow any polish residue to spin freely. Please remove or trim them
because otherwise they may harm the work or your own body.
Wire brushing operations
• Be aware that the brush sheds wire bristles even during normal operation. Do not
overload the cables by applying an excessive load to the brush. Wire bristles can
easily penetrate light clothing and / or skin.
•
The use of a wire brush guard is recommended. The wire wheel or brush can
expand in diameter due to workload and centrifugal forces.
Other risks
Even when the power tool is used as prescribed, it is not possible to eliminate all residual
risk factors:
a. Health defects resulting from the emission of vibrations if the power tool is used
for a longer period of time or if it is not properly managed and maintained.
b. Injury and property damage from broken accessories suddenly breaking.
Caution
This power tool produces an electromagnetic field during operation.
This field can, in some circumstances, interfere with active or passive
medical implants.
To reduce the risk of serious injury, we recommend that individuals with
medical implants consult their physician before using this power tool.
If the cord is damaged or cut during work, do not touch the cord, immediately unplug the
tool. Never use the machine with a damaged cord.
The machine must not be damp and must not be used in a humid environment.