Total TACLI2001, Быстрый старт

Страница: 7 / 9

7
•
Plug the valve tip of the air hose directly into the tire's air valve.
•
Press the lever down to lock it firmly.
• Press to select gauge measurement of Bar, kPa and Psi.
•
Press the trigger to the proper level of pressure.
Note: Only inflate tires to manufacturer's specifications. Vehicle tire pressures can usually be
found in the manual, on the door pillar, or on the inside of the fuel filler cap.
Inflation of leisure inflatables
• Select the proper adapter (4, 5, 6, 7) and screw it into the inflator or quick coupler
(7).
•
The adapters hook into the rear of the air compressor (2).
•
Insert the connector adapter into the appropriate inlet on the inflatable.
Note: Only inflate products per manufacturer's specifications
.
Cleaning
• Only clean the inflator with a clean, dry cloth.
•
Do not use cleaning products.
•
Make sure the inflator is free of dust or other debris before connecting it.
Maintenance
Attention
When performing maintenance, use only original spare parts. The use of any other non-
genuine spare parts may create a hazard or cause damage to the product.
Always wear eye protection with side shields to comply with regulations. Failure to do so
could result in possible serious injury.
Maintenance
•
Always remove the battery pack from your tool when you are assembling parts,
making adjustments, cleaning, or when not in use.
•
This power tool does not require intensive maintenance like other types of tools;
however, the ventilation slots in the motor housing must be kept clean. If the unit
becomes defective, the repair must be carried out by an official dealer.
• Make sure your battery is always securely attached.
•
Keep the battery clean and dry. Keep the charger in a dry room. Remove any
traces of corrosion from the charging terminals.
•
Avoid the use of solvents when cleaning plastic parts.