background image

4/44 

Thank you for using our product. For your safety and to ensure a correct operation, we would 

like to bring to your attention some aspects of this manual:

•  This booklet supplies useful instructions for the correct operation and maintenance of the 

product. It is therefore necessary to pay the utmost attention to all of the paragraphs that 

illustrate the most simple and secure way to operate and use this product.

•  This booklet must be considered an integral part of the machine and must be included 

with the deed of sale.

•  Neither this publication, nor part of it, can be reproduced without written authorisation on 

the part of the manufacturer.

•  All of the information reported herein is based on data available at the moment of printing; 

the manufacturer reserves the right to carry out modifications to its own products at any 

moment, without notice and without incurring in any sanction. It is therefore suggested to 

always check for possible updates.

The person responsible for the use of the product must make sure that all of the safety rules 

in force in the country of its use are applied, to guarantee that the equipment is used in 

conformity with the use for which it is destined and to avoid any dangerous situation for the 

user.

The following warning signs are used in this manual to warn you for dangers and risks:

Informative, be careful.

Warning, can lead to injury and damage if instructions aren’t followed.

Danger, can lead to serious or fatal injury and serious damage if instructions 

aren’t followed.

The following conventions are used in this manual:

1

3

4

2

1 Right
2 Left
3 Front
4 Back

Содержание ELP15EULIT













































Отзывы: