Total Source ELP15EULIT, Руководство по эксплуатации

Страница: 27 / 44

27/44
2. Daily maintenance check
• Check pallet truck frame for damage.
• Check wheels for wear and damage.
• Visually inspect battery for damage.
• Check if the cables are still connected and check for damage.
3. Hydraulic system
Lubrication may only be made by a qualified service technician and according to the
manufacturer’s instructions.
Use grease to lubricate all moving parts, lubricate the following parts every six months.
Type grease Reference
Hydraulic oil ISO VG32 141TA2734
Lubricating grease 107TA8448
Please check the oil level every six months. The oil capacity is about 0,3 l. Top up the fluid
level in the rubber reservoir to 5 mm below the top. This must be done with the forks in the
lowered position. Use the hydraulic oil type according to the temperature conditions below.
Type oil Reference
Hydraulic oil ISO VG32 141TA2734
Hydraulic oil ISO VG32 for extremely cold temperatures 165TA7512
Hydraulic oil SH32 for food industry 165TA7513
Oil change
Draining the oil:
1. Lower the forks to their lowest position.
2. Remove the discharge valve shaft and the spring from the
discharge valve body.
3. The oil now drains out of the hole of the discharge valve (collect
the waste oil in an oil receptacle).
4. After draining the oil, reinstall the discharge valve shaft and the
spring.