10
TOTAL GYM PULL-UP TRAINER
®
OWNER’S GUIDE |
MAINTENANCE
TOTAL GYM PULL-UP TRAINER
®
OWNER’S GUIDE |
WARRANTY INFORMATION
MAINTENANCE
Maintenance and Care
Your Total Gym Pull-up Trainer unit will
offer you or your facility and your clientele
years of easy operation if you follow these
simple tips for maintenance and care.
With periodic cleaning, moving parts and
rolling surfaces will maintain their smooth
function. Clean rail surfaces on a regular
basis with a noncorrosive cleaner like soap
and water or waterless cleaner or just
wipe clean with a dry towel. Some black
powder residue is normal on the inside of
the rails. All other parts can be cleaned
the same way or antibacterial wipes may
be used.
Caution!
DO NOT USE ANY LUBRICANTS
OR SILICONE-BASED PRODUCTS on
the rails or wheels. This will cause the
wheels to slide rather than roll and will
damage the wheels. Use a non oil–
based window cleaner on the glideboard
material. DO NOT USE ARMOR ALL
®
OR
LIKE SUBSTANCES. These will make the
glideboard slippery. Wipe down your Total
Gym Pull-up Trainer with a clean cloth.
MAINTENANCE SChEDULE
WEEkLY
1. Wipe down rails with a non-corrosive,
no alkaline, no alcohol cleanser.
2. Clean all surface areas for aesthetics.
3. Check all screws, fastener to ensure
they are installed correctly and
tightened.
4. Check all pads for wear and replace
as needed.
MONThLY
1. Visually inspect the rollers. Clean any
debris accumulated on the roller.
2. Inspect rubber stoppers.
3. Replace all parts that show signs
of wear. Contact Customer Service
in USA at 858-586-6080 or
email [email protected]. For
international customers, contact the
approved distributor in your country.
DAILY
1. Wipe down all padded surfaces with
antibacterial cleanser after each use.
2. Move the glideboard up and down
rails to ensure smooth rolling. If
glideboard does not roll smoothly,
clean rails and wheels thoroughly.