TOTAL GYM
®
CORE TRAINER BLAST |
ASSEMBLY INSTRUCTIONS
5
To order optional accessories, please go to TotalGymDirect.com
Tools have been provided for your convenience.
1.
Insert the 2 plastic spacers into the top outside hole on the
left and right main frame rail. Attach the front floor tube to
the main frame assembly with 2 M8 X 65 hex bolts and 2 flat
washers using the lower set of holes on the front floor tube.
Hand tighten an M8 nut onto each M8 X 65 bolt with a flat
washer (you will return after Step 2 to tighten using the two
wrenches provided).
front floor tube
(with caps)
M8 Nuts
flat
washers
plastic spacer
M8*65 hex bolt
M8*65 hex bolt
plastic spacer
main frame
assembly
2.
Insert the left and right handle brackets between the front
floor tube and the main frame, and make sure holes are in
alignment. Position with the small tube to the outside and the
flat bracket to the inside as shown. The rubber caps on the
handle brackets are to face toward the glideboard. Attach the
left and right handle brackets (marked L and R) to the main
frame by inserting the safety pins into the top outside hole of
the front floor tube and through the main frame (Left/Right is
determined by standing at the bottom of the glideboard and
facing the front floor tube). Next, attach the handle brackets
to the main frame assembly with 4 M6 x 15 bolts.
TIP:
hand
tighten all 4 bolts first then tighten all bolts completely with
provided Allen wrench. Now, you should tighten the 2 M8 X 65
bolts with flat washers and M8 nuts from Step 1 using the two
provided wrenches.
left handle bracket
right handle bracket
M6 x 15 bolts
safety pin
safety pin
M6 x 15 bolts
rubber
caps
NOTE:
small tube
should face out
when properly attached
small tube
glideboard
Assembly Instructions
3.
Insert 2 alignment pins on bottom of elbow pad into the left
and right handle bracket holes. Attach the elbow pad to the left
and right handle brackets with 2 M6 x 15 bolts. Tighten with
provided Allen wrench.
elbow pad
M6 x 15 bolt
M6 x 15 bolt
4.
Attach handlebar with grip with 4 M6 x 15 bolts.
TIP:
hand
tighten all 4 bolts first then tighten completely with provided
Allen wrench.
handlebar
with grip
4 M6 x 15 bolts
Check to make sure all bolts are properly tightened before beginning
to use your product.
WARNING
!
FAILURE TO READ AND FOLLOW THE SAFETY INSTRUCTIONS STATED IN THE OWNER’S MANUAL MAY RESULT IN
POSSIBLE SERIOUS INJURY OR DEATH. KEEP CHILDREN AWAY. MAXIMUM USER WEIGHT 300 LBS. REPLACE THIS
LABEL IF DAMAGED, ILLEGIBLE OR REMOVED. FOR HOUSEHOLD USE ONLY. CALL CUSTOMER SERVICE AT
1-800-303-7896 FOR REPLACEMENT LABEL, MANUAL OR QUESTIONS.
WARNING
!
CRUSH HAZARD.
KEEP HANDS
CLEAR DURING
FOLDING.
MAKE SURE THE
SAFETY PINS ARE
COMPLETELY
INSERTED BEFORE
BEGINNING ANY
EXERCISES.
WARNING
!
CAUTION
!
KEEP HAIR, FINGERS, LOOSE CLOTHING, PETS, AND CHILDREN AWAY FROM HINGES AND OTHER
MOVING PARTS TO AVOID SERIOUS INJURY. ALSO, BE SURE TO HAVE ALL SAFETY PINS LOCKED IN PLACE
BEFORE GETTING ON YOUR TOTAL GYM
®
CORE TRAINER BLAST TO AVOID SEVERE INJURY.
