Example: to search for your Television Code:
1.
Switch your Television on (not on standby).
2.
Press the
TV
key on your TOTAL
CONTROL 8.
3.
Press and hold down the SETUP key
until
the red light (LED under POWER
key) on the TOTAL CONTROL 8 blinks
twice.
4.
Press
9 9 1
, the red light will
blink twice.
5.
Next, press
POWER
.
6.
Aim the TOTAL CONTROL 8 at your
Television. Now press
CH+
over and over,
until your Television turns off (every time
you press the CH+ key the TOTAL
CONTROL 8 will send out a POWER signal
from the next code contained in the
memory).
You may have to press this
key many times (up to 150 times) so
please be patient.
If you skip past a code, you can go to the
previous code(s) by pressing the CH- key.
Remember to keep pointing the TOTAL
CONTROL 8 at your Television while
pressing this key.
7.
As soon as your television turns off, press
SETUP
to store the code.
- Most TV’s do not switch on pressing the POWER key.
Please try pressing a “number” key to switch your TV
back on.
- If you cannot control your Television properly, please
continue the Search Method, you may be using the
wrong Code.
- To search for the code for another device follow the
instructions above only press the appropriate device
key instead of TV during step 2.
- If the original remote control of your Video recorder
or DVD player does not have a POWER key, press
PLAY instead of POWER during step 5.
7
