4
11. -/-- key
The -/-- key (or 10 key function, if available on
your original remote control) is used for one/two
digit input switching.
12. AV key
The AV key operates the same function it did on
your original remote control. In AUD mode the AV
key will give you the possibility for direct input
selection if your original remote has one single
key for input selection.
13. Transport keys (PLAY, STOP etc.)
These keys operate the transport functions (PLAY,
FF, REW etc.) of your device. To prevent accidental
recording, the RECORD key must be pressed
twice
to start recording.
14. Teletext/FASTEXT keys
These keys are used to operate the main teletext
functions. Of course, your Television must have
teletext capability. For a more detailed
explanation of teletext and fastext, please refer to
the manual of your television. Remember,
different televisions control teletext and fastext
functions in different ways. Not all of the teletext
functions may be available on your particular
model.
The TOTAL CONTROL 8 remote requires 2 new
AAA/LR03 alkaline batteries.
1.
Lift off the cover by pulling the battery
compartment cover tab.
2.
Install two fresh AAA/LRO3 batteries as indicated by
the illustration in the battery compartment.
3.
Close the battery cover.
Batteries
