4
You can adjust the radio reception by increasing the amplification
(amplifier knob) or by adjusting the orientation of the telescopic antenna
(for more details about these operations refer to the "Reception" section).
Important:
-
Do not use outdoors.
Using the UC-A360 indoor antenna for dual reception (video and audio)
Important: For this you need an additional "2-way coaxial splitter" (not
included) and two "coaxial cable connectors" (not included). See
diagrams B and C (page 1).
USING THE ANTENNA FOR BOTH TV (ON UHF AND VHF)
AND RADIO (ON FM)
Follow the instructions below refering to diagram 3 (page 1)
1. Turn off the TV and radio to which you want to connect the antenna.
2. Connect the antenna’s power supply cord to a 230V~ wall socket
3. Switch ON the antenna.
4. Activate the antenna by turning the amplifier knob clockwise.
The red light on the front of the antenna will light up, indicating that
the antenna is on.
5. Connect the "2-way coaxial splitter" to the antenna coaxial cable.
6. Connect the 2 different "coaxial cable connectors" to the two outputs
of the "2-way coaxial splitter".
7. Connect the "coaxial cable connectors" to the antenna input on the
back of your TV and radio.
8. Turn on your TV and radio. You should now be able to receive UHF
and VHF channels on your TV, and FM stations on your radio.
You can adjust the reception by increasing the amplification (using the
amplifier knob) or by adjusting the orientation of the loop and telescopic
antennas (for more details about these operations refer to the
“Reception” section).
Important:
-
You need to programme the channels on your TV and radio when
using the UC-A360 antenna, please refer to the instruction manual
supplied with your TV and radio.
-
Do not use outdoors.
Ultra_Control_UC_A360 11 talen_ON_OFF:Ultra_Control_UC_A360 11 talen 30-12-09 09:23 Pagina 4
