Notices A-3
monitoring reception when the MP I -modem is on and off, try
to correct the problem with one or more of the following
measures.
♦
Reorient the receiving antenna.
♦
Relocate the computer with respect to the receiver.
♦
Relocate the computer and/or the receiver so that they
are on separate branch circuits.
If necessary, consult your dealer or an experienced radio/
television technician for additional suggestions. You may find
the following booklet, prepared by the Federal Communications
Commission, helpful:
How to Identify and Resolve Radio -TV Interference
Problems
Stock No. 004 -000-0345 -4
U.S. Government Printing Office
Washington, DC 20402
In accordance with Part 15 of the FCC rules, any modification to
or tampering with this device that causes harmful interference
to others may be reason for prohibiting future operation.
For Users in Canada
The Industry Canada (formerly DOC) label identifies certified
equipment. This certification means that the equipment meets
certain telecommunications network protective, operational,
and safety requirements. The department does not guarantee
the equipment will operate to a user's satisfaction.
Before installing this equipment, make sure you are permitted
to connect it to the facilities of the local telecommunications
company. You must also install the equipment using an
acceptable method of connection. In some cases, you may also
extend the company's inside wiring for single line individual
service by means of a certified connector assembly (telephone
extension cord). You should be aware, however, that
compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the
