background image

 

CAUTION

 

This manual contains cautions and instructions for safe use of the product. 
Please read it carefully before use and ensure appropriate use.

 

This document illustrates the dangers of using this product without taking necessary 
precautions. Please refer to below symbols for different types of safety points.

 

CAUTION 

CAUTION

 

CAUTION 

ATTENTION

 

ATTENTION

 

ATTENTION

Illustrates when misused, there are dangers of serious injuries or possible 
fatal accidents. 

Illustrates when misused, there are dangers of casualties or possible 
physical damage of the product. 

This document illustrates safety points to be kept using below symbols.

Illustrates specific conducts which are prohibited.

Illustrates specific guidelines which are enforced.

Precautions upon installing the product

 (Please read before installation.)

Check the foundation base and strength of the material before installing this 
product. If not installed properly to the foundation base, there are dangers of it 
falling. 

Install a product as instructed with necessary quantity of brackets. If not 
the product may fall.   

This product is intended for indoor use. Please do not use it 
for exterior purpose.

 

Locations subject to high temperatures and high humidity, 
or areas where water may leak, should be avoided.

 

Make sure to install a product horizontally. 

Safety in Use (Please read thoroughly)

Do not hang anything on this product or do 
not hang down. This may cause

 accident. 

Power source for this product is AC100V

240V. 

Do not use any other power supply.

 

This product supports our designated switch only. 
Do not use any other switch.

 

Avoid any actions that may damage the power 
cord or plug. Using damaged components may 
result in electric shock, short circuits, or fire.

 

Clean power plugs at regular intervals. Plugs 
exposed to moisture or to excessive dust may lead 
to insulation failures or cause fires.

 

 

Avoid handling power plugs with wet hands. 
Doing so may result in electric shock. 

When there is strong wind, please either close the 
window or have the curtain completely open. 

Please do not dismantle the mechanical assembly nor 
lubricate the moving parts of this product. This will ensure 
physical damage or malfunction of the product. 

To avoid breakage and malfunction, do not disassemble 
this product.   

Please do not use it by open flames. 

Around the area where the screen is to open and 
close, please remember to clear all objects which 
may break when placed around the screen. 

Содержание PROGRESS 50







Отзывы: