TOSO PROGRESS 50, Инструкция по эксплуатации

Страница: 5 / 6

ATTENTION
⑤
⑥
②
①
When securing the Stop into position, fit in such a way that the convex portion of
the Stop fits into the concave portion of the Pulley. Align carefully; an improper fit
may cause the Stop to fall off.
Location of Bracket
Refer to chart below, determine the locations of the Brackets.
For the Rail Set with OT Splice, fit Brackets to both sides of the OT Splice.
Pilot Roller Plate Fixation Screw
M R Arm
Joint Plate
Pilot Roller
Fix Master Roller Arm and Pilot
Roller Plate with Wheel with the
Pilot Roller attachment screw.
Use the Joint Plate to join the Pilot
Rollers.
Place the Pilot Rollers end to end.
⑦
○ ×
Stop
The concave portion
within 900 mm on
either side within 900 mm on
either side
Use a screwdriver to loosen the
Stop screw, then remove the Stop.
⑧
Stop
OT Splice Bracket
⑨
①
Insert Noiseless Rollers and secure
the Stop into place.
(Two-way draw, insert the same
number of Noiseless Rollers from
the Pulley at both ends.)
Installation method of the bracket
After attaching the Brackets to the product body, fit the Brackets to the mounting surface.
Loosen the Bracket screw and
rotate the Fastener.
Noiseless
Roller
The fastener