■
For operations in which the operating
address is specified.
❶
Specify the Address No. registered for the
product you want to operate.
❷
To open and close the curtain, press the OPEN
or CLOSE button.
❸
To stop the curtain half way, press the STOP
button.
<Check the Operation with Infrared Remote Control (9ch)>
❶
To open and close the curtain, press the
OPEN or CLOSE button.
❷
To stop the curtain half way, press the STOP
button.
<Check the Operation with 3 Button Switch>
P . 16
Check the Operation
❶
Switch the Motor Set ON.
❷
If you have not yet executed the instruction, do so now and set the Limit Position.
❸
Operate using each switch and check the operation.
❶
❷
❶
❷
❸
P . 17
The infrared remote control has orientation
as illustrated, therefore be sure to point
your remote control toward the infra-red
receiver. Maximum distance to reach the
radiation from the remote control to the
receiver is 10 meter in radiation axis. Please
note that when the radiation axis is not
directly meeting the Receiver, radiation
travels shorter distance.
Because of characteristic as above, “ALL
(A)” button is not available for opening
/closing several motors at once. Please be
sure to point your remote control toward
the infra-red receiver that is connected to
the motor you would like to open/close
individually.
Please do not mount infra-red receiver to
shinny location.The infra-red receiver may
not receive infra-red signal correctly if the
receiver is mounted where it is exposed to
direct sunshine or even shinny place where
it is not exposed to direct sunshine.
If the operation became unstable, please
change the batteries.
Caution
10
m
10
m
30
°
30°
45°
4
5
°
6
m
6m
3
m
3m
■
To execute an operation for all product addresses
❶
Specify ALL.
❷
To open and close the curtain, press the
OPEN or CLOSE button.
❸
To stop the curtain half way, press the STOP
button.
❷
❸
❶
