Toslink 14524, Руководство пользователя

Страница: 7 / 34

7
PRODUCT OVERVIEW
Front Panel
1. Power Button: Depress the power button to turn the controller/amplifier on or off.
Note that when the controller is powered on, each individual zone will remain in
standby until its keypad is activated.
2. Power LED Indicator: This LED is off when the controller is powered off and
illuminates red when power is applied.
3. Zone Status LED Indicators: These multicolor LEDs illuminate blue whenever the
individual zone keypad is activated. If the amplifier is driven into distortion, the
audio signal will cut off and the LED will change color to red, indicating that you
should immediately reduce the volume level using the zone keypad.
Rear Panel
4. Preamp Outputs: Each of these four stereo pairs of RCA jacks is used to connect to a
dedicated power amplifier, instead of using the built-in amplifier.
5. Bridge Switch: Each of these slide switches is used to switch the zone between
Stereo and Bridged Mono mode. In Stereo mode you can connect 4-ohm or 8-ohm
speakers, but in Bridged Mono mode you can only connect an 8-ohm load.