Toshiba ZL1* Digital Series, Руководство пользователя

Страница: 47 / 108

47
CONTROLS AND FEATURES
Engl
ish
Colour Calibration
The aim of Colour Calibration is to measure and/or adjust the
colour response (White Balance) of your LCD panel.
Colour Calibration is used by various fields, such as gaming,
photography, engineering, medical and more. In order to
calibrate a display correctly, you need a colour analyzer
TPA-1 (not supplied).
NOTE: This feature is available when the Picture Mode option
is Hollywood Pro .
Apply Calibration
a
In the Expert Picture Settings menu, press
B
or
b
to
select Colour Calibration and press OK .
b
Press
B
or
b
to select Apply Calibration and press
C
or
c
to select Enabled .
Manual Colour Calibration
a
In the Colour Calibration menu, press
B
or
b
to
select Manual Colour Calibration and press OK .
b
Place the probe of the colour analyzer over the square
on screen to measure.
c
Input the value measured with the colour analyzer
using the number buttons (0-9).
d
Press
BbC c
and input the values to fill all RGBxy
matrix table.
e
Highlight Start and press OK .
Please wait until you see “Manual Colour Calibration
has been completed.” on screen.
To return to factory setting
a
Highlight Reset and press OK .
Auto Colour Calibration
a
In the Colour Calibration menu, press
B
or
b
to
select Auto Colour Calibration and press OK .
b
Connect the USB colour analyzer to the USB 1 or USB
2 port.
c
Place the probe of the USB colour analyzer over the
square on screen and press
OK .
Auto Colour Calibration will start.
Please wait until you see “Auto Colour Calibration has
been completed.”.
Gamma Calibration
a
In the Expert Picture Settings menu, press
B
or
b
to
select Gamma Calibration and press OK .
b
Press
B
or
b
to select Apply Calibration and press
C
or
c
to select Enabled .
c
Press
B
or
b
to select Auto Gamma Calibration and
press OK .
d
Connect the USB colour analyzer to the USB 1 or USB
2 port.
e
Input the target value and place the USB colour
analyzer over the square on screen.
f
Highlight Start and press OK .
Auto Gamma Calibration will start.
Please wait until you see “Auto Gamma Calibration
has been completed.” on screen.
To return to factory setting
a
Highlight Reset and press OK .
Resetting to the factory defaults
a
In the Expert Picture Settings menu, press
B
or
b
to
select Reset and press OK .
A confirmation screen appears.
b
Select Yes and press OK .
Manual Colour Calibration
Red 0.642
x y
0.277
0.143
0.335
0.603
0.067
Blue
Green
Start Reset
Please input the value measured with the coulour analyser.
Red 0.642
x
y
0.277
0.143
0.335
0.603
0.067
Blue
Green
Auto Gamma Calibration
Target Colour Temperature 0.313
x y
2.4
0.329
Target Gamma
Start Reset
Please input the target value and place the USB colour analyser
over the square.