19
ENGLISH
LOADING AND UNLOADING THE VIDEO CASSETTE TAPE
Use only video cassette tapes marked .
Push the center of the tape until it is automatically inserted.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab intact, playback will start immediately and the
TV will turn on.
Insert the cassette with its labelled side facing you.
An inverted cassette cannot be inserted.
LOADING
UNLOADING
To unload a video cassette, press the EJECT
button on the remote control, or press the STOP/
EJECT button on the TV/VCR twice. The first
press will stop the tape in any mode. The second
press will eject the tape.
Pull the cassette out.
AUTOMATIC EJECT
When the VCR is automatically rewinding the tape and
reaches its end (AUTO REWIND), the tape will be ejected
automatically. (See NOTE on page 24.)
TO PREVENT ACCIDENTAL ERASURE
TO RECORD AGAIN
After recording, break off the erase prevention tab if
you do not wish to record over the tape.
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of
the cassette housing.
NOTES:
•
Always eject the tape when not in use.
•
The cassette can be ejected even if the ON/STANDBY button is OFF.
Screwdriver
Erase prevention tab
Adhesive tape
NTSC
EJECT
OR
STOP/
EJECT
5960101A/E/17-22
28/5/01, 12:44 PM
19
