Toshiba VE28, Руководство по обслуживанию

Страница: 18 / 84

Reference Information
Toshiba 2-13
GB
30
You can set repeat play to repeat the tape continuously from beginning to end.
1
Press MENU on the remote control. Result
:
The programming menu is displayed.
2
Press the corresponding
›
,
‚
or
¥
,
Š
buttons to select the
EASY OPERATION
option.
3
Press the OK button to select this option. Result
:
The
EASY OPERATION
menu is displayed.
4
Press the corresponding
›
or
‚
buttons, until the
REPEAT PLAY
option is selected.
5
To...
Press
¥
or
Š
, until...
Repeat play
ON
is displayed.
Do not wish to repeat play
OFF
is displayed.
6
On completion, press MENU twice to exit the menu.
Auto Repeat Play
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
›
‚
Š
END:
MENU
BONUS
EASY OPERATION
PROG
OPTIONS
IN
S
T
A
L
L
CLOCK
BONUS
BONUS
›
‚
¥Š
OK
END:
MENU
GB
29
Picture Search, Fast Forward/Rewind
Picture Search enables you to Fast Forward or Rewind and look for a particular part of a tape.
1
Press PLAY, the VCR will enter normal play mode. While in play, press and release the
ŠŠ
(or
¥¥
) button. The VCR will search at 5
times the normal playback speed.
2
To return to normal playback mode, press the
Š
button.
3
If you press and HOLD down the
ŠŠ
(or
¥¥
) button the VCR will
search at 9 times the normal speed. Releasing the
ŠŠ
button will
return the VCR to search at 5 times the normal speed. To return to normal playback mode, press the
Š
button.
4
Whilst in Picture Search mode, if you press the
ŠŠ
button again,
the VCR will enter normal Fast Forward mode.
5
Likewise, whilst in Picture Search
¥¥
mode, if you press the
¥¥
button again, the VCR will enter normal Rewind mode.
6
If, when Redwing (
¥¥
) or Fast Forwarding (
ŠŠ
), you press the
¥¥
(or
ŠŠ
) button, the VCR will enter the Picture Search mode.
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows:
etc.
Prev Seq.
Seq. being
played
Next
Seq.
etc.
➞
➢
This VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same
system and vice versa.
INTRO SCAN
1
To search for a specific index, press INDEX.
2
Press the
¥¥
or
ŠŠ
buttons depending on the direction
where your desired programme is located.
3
When an Index mark is found the VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
4
If you want to watch the tape from a particular Index, simply press
Š
II
.
Index Skip Search: This feature will enable you to fast forward/rewind to a specific point on a tape: E.g. if you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the INDEX button.
1
Press the INDEX to start the Index search.
2
Press the
¥¥
or
ŠŠ
buttons twice more. This will take
you directly to the start of the desired programme is located.
3
These Index searches can be made forwards: (press
ŠŠ
) or
backwards: (press
¥¥
).
4
To cancel an Index search simply press the
Š
or
■
button.
4
5
6
7
8
9
0
MENU
COUNT
.RST
TIMER
REC
CLR/RST
CH
I.SELECT
COUNT/TR
INDEX
TRK
F
.ADV
INDEX:
¥¥Š
Š
INDEX SEARCH:
ŠŠ
+01
1